Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving all of Wisconsin

Moore-O-Matic Opener Circuit Board Replacement in Wisconsin

Failed logic boards and receivers replaced, often after a power surge. Typical cost $175-$400.

When your door needs Moore-O-Matic opener circuit board replacement, you want it done safely and right the first time. Typical jobs in Wisconsin cost $175-$400, and you approve the price first. Failed logic boards and receivers replaced, often after a power surge. Whether your Moore-O-Matic opener is a few years old or a few decades, we can diagnose it and tell you honestly whether it is worth repairing. Moore-O-Matic openers are no longer made. We can often keep one running with available parts, or recommend a modern replacement.

Signs you need Moore-O-Matic opener circuit board replacement

  • The opener is completely dead even though it has power
  • It worked until a storm or power surge
  • Random operation or no response to any control
  • Diagnostic lights showing a board fault

What usually causes it

  • Power surges and lightning
  • Heat and moisture damage
  • Age

Safe checks before you call

  • Reset the breaker and try a different outlet.
  • Unplug the opener for a minute, then plug it back in.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Confirm power and rule out sensors and controls
  2. Replace the logic board or receiver
  3. Reprogram remotes
  4. Set the limits and force
  5. Recommend surge protection

On older openers, a new opener can cost about the same as a board and adds current safety and security features.

Typical Moore-O-Matic opener circuit board replacement prices

$175-$400Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Moore-O-Matic services

Local Moore-O-Matic opener circuit board replacement for Wisconsin

Cold weather thickens the grease in an opener's gears and rail, so a door that strains or reverses only in winter often needs force adjustment and cold-rated lubrication, not a new opener.

We cover 276 cities and towns across Wisconsin. Find Moore-O-Matic opener circuit board replacement in your city:

Moore-O-Matic Opener Circuit Board Replacement: frequently asked questions

How much does Moore-O-Matic opener circuit board replacement cost in Wisconsin?

Moore-O-Matic Opener Circuit Board Replacement typically costs $175-$400 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Moore-O-Matic opener circuit board replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Moore-O-Matic opener circuit board replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Moore-O-Matic warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Wisconsin or your city requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Wisconsin

Genie Opener Gear & Sprocket Replacement

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $125-$275

CHI Overhead Doors Garage Door Installation

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $1,200-$4,500

CHI Overhead Doors Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Overhead Door Commercial Door Operator Repair

Trolley, jackshaft and hoist operators repaired and adjusted.

Typical $300-$1,200

Raynor Garage Door Cable Repair

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $150-$350

Craftsman Garage Door Sensor Repair

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $100-$250

Ryobi Garage Door Opener Installation

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $350-$800

Martin Door Extension Spring Replacement

Side-mounted extension springs replaced in matched pairs, with safety cables installed.

Typical $150-$350

Ryobi Garage Door Sensor Repair

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $100-$250

Holmes Garage Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Midland Garage Door Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

Garage Door Hinge Replacement

Cracked or loose hinges replaced so panels stay aligned and quiet.

Typical $100-$250

Garage door stuck, noisy or broken?

Talk to a garage door technician in Wisconsin now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote